frameless

DESCRIPTION: Melamine is a low pressure laminate material, thermofused to 60# medium density particleboard.

 

END PANELS are 3/4″ furniture board with UV cured wood maple veneer. Exterior finished end panels are wood veneer or laminated with high pressure plastic laminate. Exposed edges are banded with wood veneer or PVC. Also available with Maple or White Melamine.

TOP AND BOTTOM are 3/4″ furniture board with UV cured wood maple veneer. Exposed edges are banded with wood veneer or PVC. Tops and bottoms are fastened to the end panels by blind dado construction. Also available with Maple or White Melamine.

BACKS are 1/4″ furniture board with UV cured wood maple veneer. Backs are dadoed into tops, bottoms, and end panels. Also available with Maple or White Melamine.

WOOD CORNER BLOCKS of 3/4″ plywood board, are used for bracing all base cabinets. Corner blocks are also used for securing countertops to cabinets.

TOE KICK STRIPS are 1/4″ furniture board with wood veneer or 1/4″ particleboard with high pressure plastic laminate. Toe Kick strips are available in eight foot lengths for placement after cabinet installation.

SHELVES are 3/4″ furniture board UV cured wood maple veneer. Shelves are adjustable with steel pin shelf supports on 32mm centers. Also available with Maple or White Melamine.

DRAWERS are constructed of 5/8″ solid maple wood sides, backs, and fronts with dovetail corners. Drawer bottoms are 1/4″ plywood dadoed into sides. Drawer guides are full extension soft close. Drawer guides are concealed undermount, metal guides with 14 synthetic cylindrical rollers. Guides feature a 100 pound load capacity and are designed with a self-closing action. Drawer fronts are attached with adjustable fasteners to permit filed alignments in four directions. NOTE: Any adjustments necessary must be done before installation of set screws and decorative hardware.

DOORS are constructed of the following materials: Flat doors are 3/4″ solid wood or 11/16″ fiberboard with wood veneer or high pressure plastic laminate. Panel doors are 3/4″ solid wood frames with 1/2″ solid wood flat panel insert or 3/4″ solid wood raised insert. On painted doors an MDF center panel will be used when there are no wood treatments specified.

WOODS are available in twelve species: oak, natural birch, select red birch, paint grade maple, select maple, cherry, rustic cherry, alder, rustic alder, natural hickory, walnut, and quarter sawn red oak. Additional wood species are available upon request.

FINISHES Wood finishes are available in natural or a selection of standard and special stain colors. The stain is sealed with a catalyzed vinyl sealer (for moisture barrier), hand sanded, and finished with a high quality catalyzed non-yellowing, acrylic top coat. Finishes are also available in a selection of standard and special opaque colors. Opaque colors are obtained by applying a base coat of catalyzed vinyl sealer (for moisture barrier), and a top coat of high quality pigmented catalyzed acrylic. The catalyzed acrylic top coat is highly resistant to household chemicals, water, alcohol, and mild acids. Cabinets have a finish wood exterior and a standard interior in maple veneer with a natural finish.

LAMINATE FINISHES are available in 1/32″ high pressure laminates. Select colors are available in solid and wood grain matte finishes. Exposed edges are banded with matching PVC edging. Edging for other than select colors may not be available in matching PVC. Edging may need to be high pressure laminate. Cabinet with high pressure laminate exterior has a standard interior and drawer box in white melamine

.

HARDWARE hinges are a clip-on system for mounting cabinet doors. The hinges are a concealed, self closing type with a 125° action. The hinges have fully integrated independent screw adjustment for vertical, horizontal, and depth adjustments.

Lurk Custom Cabinets reserves the right to change, without notice, the design, construction, or materials listed herein. These changes will always be made to improve the product, or they will be made if certain specified materials become unavailable for reasons beyond our control.

CUSTOM MATCH DOOR and DRAWER FRONT STYLES are available. Door profiles supplied by dealer will be matched as close as possible. Door and Drawer Front Styling charge and/or set up fees will be determined at time of match. Contact factory for more information regarding customization of doors and drawer fronts.

____________________________________________________________________________________________________________________________________________